hAP lite

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.

Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.

The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

Product specifications

Details
Product code	RB941-2nD-TC
CPU nominal frequency	650 MHz
CPU core count	1
Size of RAM	32 MB
10/100 Ethernet ports	4
Wireless chip model	QCA9533
Wireless standards	802.11b/g/n
Supported input voltage	5 V - 5 V
Operating System	RouterOS
License level	4
Antenna gain DBI	1.5
CPU	QCA9533
Max Power consumption	3W
Number of chains	2
Storage type	FLASH
Storage size	16 MB

Wireless specifications

2.4 GHz
	Transmit power (dBm)	Receive Sensitivity	Transmit power (mW)
1MBit/s	22	-96	158
11MBit/s	22	-89	158
6MBit/s	20	-93	100
54MBit/s	18	-74	63
MCS0	20	-93	100
MCS7	16	-71	40

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB941-2nD-TC		QCA9531 (650Mhz) 100M all port test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	32.5	394.8	94.0	385.0	173.6	88.9
Bridging	25 bridge filter rules	32.5	394.8	56.1	229.8	56.7	29.0
Routing	none (fast path)	32.5	394.8	94.0	385.0	160.8	82.3
Routing	25 simple queues	32.5	394.8	63.7	260.9	72.6	37.2
Routing	25 ip filter rules	32.5	394.8	33.8	138.4	34.6	17.7

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results